|
Blow molding machine & Mould |
|
Features:
1. Servo motor drives, fast speed, accurate positioning,smooth motion.
2. Cross double crank mould clamping,with strong clamping force.mould open and clamp stroke can be adjusted according to bottle size,to decrease open and clamping time.
3. Far infrared heating lamps have strong penetration,preforms heated uniformly while rotating,PLC or electronic pressure adjustor control each group of heating lamps separately.
4. The air supply system consists of blowing air-in and motion air-in,to satisfy different products required air supply.
5. Production technology processes are full-automatic, to make best quality without pollution,to save investment with high efficiency ,easy operation and simple maintenance.
Range of application:
beverage bottles,mineral water bottles,pesticide bottles,wine bottle, heat resistant bottles. |
|
ITEM |
TN2000 |
|
Product volume |
0.3-1.5L |
|
Max. product diameter |
|
|
Max. product height |
330mm |
|
Max. mouth |
Ø40mm |
|
Theoretical output/hour |
1600-2000pcs |
|
Mould thickness |
190mm |
|
Mould plate stroke |
80-125mm |
|
Stretching stroke |
400mm |
|
MouLd cavity |
2 |
|
Whole machine power |
380V50HZ 49KW |
|
heating power |
44.8 |
|
Actual Power Consumption |
6-20 |
|
Blowing air pressure and air flow |
2-3Mpa≥1.2M3/min |
|
Working air pressure and air flow |
0.8-1Mpa≥1.2M3/min |
|
Cooling-air dryer |
3Mpa≥2M3/min |
|
Machine size |
2680×1850×2000 mm
2100×800×2200 mm
800×500×210 mm |
|
The total weight |
2800KG |
|
Water chiller temperature and flow |
10-30℃ 20-30L/min |
|
The above technical parameters are updated continually,subject to the real products. Machines can be customized for special products.
| |
|
|
| |
|
|
|
|
Tel: 
